2019 John Deere X730 48-in Accel

Selling Price -

$11,199.00

46" Snow Blower. Terra Grips. Weights and Weight Bracket. Mulch Kit. Thatcher.

Information

  • Width:54 in
  • Transmission:Hydro
  • Engine Type:Gas
  • Drive Type:2WD

Photos

Highlights

  • $11,199.00
  • Rockford
  • Pre-Owned
  • 45130
  • 2019
  • John Deere
  • X730 48-in Accel
  • 1M0X730AVKM070443
  • Model: FD750D EFI
  • 25
  • 382
  • Gasoline
  • Available
  • With mower: 62.5 in. (159 cm) | With mower (deflector raised for storage): 53.6 in. (136 cm) | Without mower: 47 in. (119.4 cm)
  • 51.2 in. (130 cm) | Mower cut: 1-5.25 in. (2.5-13.3 cm) | Cut increments: 0.25 in. (0.64 cm)

Specifications

  • 2019
  • John Deere
  • X730
  • 48-in Accel
  • Riding
  • Model: FD750D EFI
  • Electronic fuel injection (EFI), overhead valve, full-pressure lube, oil filter
  • 25.5 hp (19 kW)
  • 45.5 cu in. (745 cc)
  • V-twin, cast-iron liners
  • Mechanical
  • No choke required
  • Liquid
  • Dry, replaceable with foam precleaner
  • Transaxle: Replaceable suction side 10 micron
  • Gasoline
  • Delivery: Electronic fuel injection
  • Gauge on dash
  • Hydraulic power
  • Mower: Hydraulic clutch, shaft | Attachability: Shaft or AutoConnect
  • Standard
  • Fuel tank location: Rear | Hourmeter | Taillights | 12-V outlet | Cruise control | Oil cooler | Primer/paint: E-coat/powder | Weight bracket: Standard front - holds up to four Quik-Tatch weights, 42 lb (19 kg) | Receiver hitch: front | Floor mats: Sure-grip rubber | Storage: Covered toolbox | Service interval decal | Cup holder | Tilt steering wheel: Standard, six position | Hydraulic outlets: Four, standard | Preset cut height | Mower deck: Side discharge | Mower wash port | Attachability: Roll under tracto
  • Internal wet disc
  • Welded heavy-duty
  • JDM BA8 nodular iron casting
  • 18x8.5-8 turf
  • 26x12-12 turf
  • Mower: Four | Mower Rotate: 90 degrees for easy mower removal
  • 12 V (300 CCA)
  • Engine: Solenoid shift
  • Flywheel alternator, regulated, 20 amp
  • Transaxle Forward speed: 0-8.5 mph (0-13.7 km/h) | Transaxle Reverse speed: 0-6 mph (0-9.7 km/h)
  • Fuel fill opening, On left fender: 3 in. (7.6 cm )
  • 75 in. (190.5 cm)
  • 51.2 in. (130 cm) | Mower cut: 1-5.25 in. (2.5-13.3 cm) | Cut increments: 0.25 in. (0.64 cm)
  • With mower: 62.5 in. (159 cm) | With mower (deflector raised for storage): 53.6 in. (136 cm) | Without mower: 47 in. (119.4 cm)
  • 54.5 in. (138.4 cm)
  • 48 in (122 cm)
  • Steering: 25 in. (63.5 cm) | Uncut circle radius
  • Back: 21 in. (53.3 cm)
  • 14 in. (35.6 cm)
  • Tank: 5.2 U.S. gal. (19.7 L)
  • No fuel or mower: 868 lb (393.7 kg)
  • Backup lights | Rear work lights
  • Two standard, halogen, 37 W
  • Meets ANSI standard | Meets OPEI standard | Safety video
  • Arms (Front/Rear): Overcenter / V-align
  • Fore-aft adjustment (While seated, slide rail, 14-position): 7 in. (17.8 cm) | Mower Wheel: Spring-loaded pin | Adjustability: Exact Adjust ports and onboard deck-leveling gauge
  • Two piece professional high back | Suspension: Six-position parallel arm
  • Type: Two-function hydraulic
  • Hood: Noryl GTX902, painted
  • Fender: RIM with in-mold paint | Mower: Stamped steel deck shell, 10 gauge 0.135 in. (3.4 mm)
  • Bushings: Metal, replaceable
  • Handles
  • 4 year/700 hour bumper-to-bumper