2020 John Deere X750 48

Selling Price -

$12,999.00

3 point hitch, rear PTO, 51" broom.

Information

  • Width:60 in
  • Transmission:Hydro
  • Engine Type:Diesel
  • Drive Type:2WD

Photos

Highlights

  • $12,999.00
  • Rockford
  • Pre-Owned
  • 44759
  • 2020
  • John Deere
  • X750 48
  • 1M0X750AJLM080285
  • Model: 3TNM74F | Type: Diesel, overhead valve, full-pressure lube, oil filter
  • 24
  • 324
  • Primer/paint: E-coat/powder
  • Diesel
  • Available
  • with mower: 62.5 in. 159 cm | with mower (deflector raised for storage): 53.6 in. 136 cm | without mower: 47 in. 119.4 cm
  • Mower cut: 1-5.25 in. 2.5-13.3 cm | Cut, increments: 0.25 in. 0.64 cm | 54.5 in. 138 cm

Specifications

  • 2020
  • John Deere
  • X750
  • 48
  • Riding
  • Model: 3TNM74F | Type: Diesel, overhead valve, full-pressure lube, oil filter
  • 24 hp 17.9 kW
  • 60.6 cu in. 993 cc
  • Three, cast-iron liners
  • Speed control: One lever
  • Method: Liquid
  • Paper dry-type with primary and secondary elements
  • Diesel
  • Delivery: In-line indirect injection
  • Mechanical
  • Type: Hydraulic power
  • Seat: Six-position parallel arm
  • Internal wet disc
  • 18x8.5-8 turf
  • 26x12-12 turf
  • Steering: 14 in. 35.6 cm | Mower: Four
  • 12 V 500 CCA
  • Engine-mounted alternator, regulated, 40 amp
  • Engine: Solenoid shift
  • Two standard, halogen, 37 W
  • Forward: 0-8.5 mph 0-13.7 km/h | Reverse: 0-6 mph 0-9.7 km/h
  • Mower: Hydraulic clutch, shaft | Shaft or AutoConnect
  • Primer/paint: E-coat/powder
  • Welded heavy-duty
  • Fuel fill opening: On left fender, 3 in. 7.6 cm | Fore-aft adjustment : While seated, slide rail, 14-position, 7 in. 17.8 cm
  • 25 in. 63.5 cm
  • Back: 21 in. 53.3 cm
  • Mower cut: 1-5.25 in. 2.5-13.3 cm | Cut, increments: 0.25 in. 0.64 cm | 54.5 in. 138 cm
  • Accel Deep™ mower deck: 48 in. 122 cm
  • 75 in. 190.5 cm
  • 54.5 in. 138.4 cm
  • with mower: 62.5 in. 159 cm | with mower (deflector raised for storage): 53.6 in. 136 cm | without mower: 47 in. 119.4 cm
  • Tank: 5.2 U.S. gal. 19.7 L
  • Bracket: standard front - holds up to four Quik-Tatch weights, 42 lb 19 kg | No fuel or mower: 948 lb 430 kg
  • Fuel tank location: Rear | Taillights or reflector: Taillights | Transaxle Type: K90 hydrostatic integrated with transaxle | Transaxle Control: Twin Touch™ pedals | Front axle: JDM BA8 nodular iron casting | Storage: Covered toolbox | Mower attachability type: Roll under tractor | Front draft arms: Overcenter | Rear draft arms: V-align | Mower wheels rotate: 90 degrees for easy mower removal | Seat type: Two-piece adjustable seat with brand embroidery
  • Fuel: Gauge on dash
  • Replaceable suction side 10 micron
  • Spindle bushings: Metal, replaceable | Hood material: Noryl GTX902, painted | Floor mats: Sure-grip rubber | Lift system type: Two-function hydraulic
  • Fender: RIM with in-mold paint | Mower: 10 gauge 0.135 in. 3.4 mm
  • Fender: Handles
  • Mower wheel: Spring-loaded pin | Mower level: Exact Adjust ports and onboard deck-leveling gauge
  • 4 year/700 hour bumper-to-bumper (Term limited to years or hours used, whichever comes first, and varies by model.