Back

2020 John Deere X750 48

3 point hitch, rear PTO, 51" broom.
MoreLess
Limited Time Offer!

Selling Price -$12,999.00
No Images Available

Selling Price -

$12,999.00

HD Certified Pre-Owned
  • Width:60 in
  • Transmission:Hydro
  • Engine Type:Diesel
  • Drive Type:2WD
  • 2020
  • John Deere
  • X750
  • 48
  • Riding
  • Model: 3TNM74F | Type: Diesel, overhead valve, full-pressure lube, oil filter
  • 24 hp 17.9 kW
  • 60.6 cu in. 993 cc
  • Three, cast-iron liners
  • Speed control: One lever
  • Method: Liquid
  • Paper dry-type with primary and secondary elements
  • Diesel
  • Delivery: In-line indirect injection
  • Mechanical
  • Type: Hydraulic power
  • Seat: Six-position parallel arm
  • Internal wet disc
  • 18x8.5-8 turf
  • 26x12-12 turf
  • Steering: 14 in. 35.6 cm | Mower: Four
  • 12 V 500 CCA
  • Engine-mounted alternator, regulated, 40 amp
  • Engine: Solenoid shift
  • Two standard, halogen, 37 W
  • Forward: 0-8.5 mph 0-13.7 km/h | Reverse: 0-6 mph 0-9.7 km/h
  • Mower: Hydraulic clutch, shaft | Shaft or AutoConnect
  • Primer/paint: E-coat/powder
  • Welded heavy-duty
  • Fuel fill opening: On left fender, 3 in. 7.6 cm | Fore-aft adjustment : While seated, slide rail, 14-position, 7 in. 17.8 cm
  • 25 in. 63.5 cm
  • Back: 21 in. 53.3 cm
  • Mower cut: 1-5.25 in. 2.5-13.3 cm | Cut, increments: 0.25 in. 0.64 cm | 54.5 in. 138 cm
  • Accel Deep™ mower deck: 48 in. 122 cm
  • 75 in. 190.5 cm
  • 54.5 in. 138.4 cm
  • with mower: 62.5 in. 159 cm | with mower (deflector raised for storage): 53.6 in. 136 cm | without mower: 47 in. 119.4 cm
  • Tank: 5.2 U.S. gal. 19.7 L
  • Bracket: standard front - holds up to four Quik-Tatch weights, 42 lb 19 kg | No fuel or mower: 948 lb 430 kg
  • Fuel tank location: Rear | Taillights or reflector: Taillights | Transaxle Type: K90 hydrostatic integrated with transaxle | Transaxle Control: Twin Touch™ pedals | Front axle: JDM BA8 nodular iron casting | Storage: Covered toolbox | Mower attachability type: Roll under tractor | Front draft arms: Overcenter | Rear draft arms: V-align | Mower wheels rotate: 90 degrees for easy mower removal | Seat type: Two-piece adjustable seat with brand embroidery
  • Fuel: Gauge on dash
  • Replaceable suction side 10 micron
  • Spindle bushings: Metal, replaceable | Hood material: Noryl GTX902, painted | Floor mats: Sure-grip rubber | Lift system type: Two-function hydraulic
  • Fender: RIM with in-mold paint | Mower: 10 gauge 0.135 in. 3.4 mm
  • Fender: Handles
  • Mower wheel: Spring-loaded pin | Mower level: Exact Adjust ports and onboard deck-leveling gauge
  • 4 year/700 hour bumper-to-bumper (Term limited to years or hours used, whichever comes first, and varies by model.
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $12,999.00
  • Rockford
  • Pre-Owned
  • 44759
  • 2020
  • John Deere
  • X750 48
  • 1M0X750AJLM080285
  • Model: 3TNM74F | Type: Diesel, overhead valve, full-pressure lube, oil filter
  • 24
  • 324
  • Primer/paint: E-coat/powder
  • Diesel
  • Available
  • with mower: 62.5 in. 159 cm | with mower (deflector raised for storage): 53.6 in. 136 cm | without mower: 47 in. 119.4 cm
  • Mower cut: 1-5.25 in. 2.5-13.3 cm | Cut, increments: 0.25 in. 0.64 cm | 54.5 in. 138 cm

Recommendations

Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.