Back

2019 John Deere X730 48-in Accel

46" Snow Blower. Terra Grips. Weights and Weight Bracket. Mulch Kit. Thatcher.
MoreLess
Limited Time Offer!

Selling Price -$11,199.00
No Images Available

Selling Price -

$11,199.00

HD Certified Pre-Owned
  • Width:54 in
  • Transmission:Hydro
  • Engine Type:Gas
  • Drive Type:2WD
  • 2019
  • John Deere
  • X730
  • 48-in Accel
  • Riding
  • Model: FD750D EFI
  • Electronic fuel injection (EFI), overhead valve, full-pressure lube, oil filter
  • 25.5 hp (19 kW)
  • 45.5 cu in. (745 cc)
  • V-twin, cast-iron liners
  • Mechanical
  • No choke required
  • Liquid
  • Dry, replaceable with foam precleaner
  • Transaxle: Replaceable suction side 10 micron
  • Gasoline
  • Delivery: Electronic fuel injection
  • Gauge on dash
  • Hydraulic power
  • Mower: Hydraulic clutch, shaft | Attachability: Shaft or AutoConnect
  • Standard
  • Fuel tank location: Rear | Hourmeter | Taillights | 12-V outlet | Cruise control | Oil cooler | Primer/paint: E-coat/powder | Weight bracket: Standard front - holds up to four Quik-Tatch weights, 42 lb (19 kg) | Receiver hitch: front | Floor mats: Sure-grip rubber | Storage: Covered toolbox | Service interval decal | Cup holder | Tilt steering wheel: Standard, six position | Hydraulic outlets: Four, standard | Preset cut height | Mower deck: Side discharge | Mower wash port | Attachability: Roll under tracto
  • Internal wet disc
  • Welded heavy-duty
  • JDM BA8 nodular iron casting
  • 18x8.5-8 turf
  • 26x12-12 turf
  • Mower: Four | Mower Rotate: 90 degrees for easy mower removal
  • 12 V (300 CCA)
  • Engine: Solenoid shift
  • Flywheel alternator, regulated, 20 amp
  • Transaxle Forward speed: 0-8.5 mph (0-13.7 km/h) | Transaxle Reverse speed: 0-6 mph (0-9.7 km/h)
  • Fuel fill opening, On left fender: 3 in. (7.6 cm )
  • 75 in. (190.5 cm)
  • 51.2 in. (130 cm) | Mower cut: 1-5.25 in. (2.5-13.3 cm) | Cut increments: 0.25 in. (0.64 cm)
  • With mower: 62.5 in. (159 cm) | With mower (deflector raised for storage): 53.6 in. (136 cm) | Without mower: 47 in. (119.4 cm)
  • 54.5 in. (138.4 cm)
  • 48 in (122 cm)
  • Steering: 25 in. (63.5 cm) | Uncut circle radius
  • Back: 21 in. (53.3 cm)
  • 14 in. (35.6 cm)
  • Tank: 5.2 U.S. gal. (19.7 L)
  • No fuel or mower: 868 lb (393.7 kg)
  • Backup lights | Rear work lights
  • Two standard, halogen, 37 W
  • Meets ANSI standard | Meets OPEI standard | Safety video
  • Arms (Front/Rear): Overcenter / V-align
  • Fore-aft adjustment (While seated, slide rail, 14-position): 7 in. (17.8 cm) | Mower Wheel: Spring-loaded pin | Adjustability: Exact Adjust ports and onboard deck-leveling gauge
  • Two piece professional high back | Suspension: Six-position parallel arm
  • Type: Two-function hydraulic
  • Hood: Noryl GTX902, painted
  • Fender: RIM with in-mold paint | Mower: Stamped steel deck shell, 10 gauge 0.135 in. (3.4 mm)
  • Bushings: Metal, replaceable
  • Handles
  • 4 year/700 hour bumper-to-bumper
  •  Calculation is estimate only.
  •  
  •  
  •  
  •  
  •  
  •  
  •  Quotes are estimates only, actual rate may vary slightly.
  •  One-Way toll road charges will be the responsibility of the customer.
  •  Additional fees and/or duties may apply to International and non-continental US shipping requests.
  • $11,199.00
  • Rockford
  • Pre-Owned
  • 45130
  • 2019
  • John Deere
  • X730 48-in Accel
  • 1M0X730AVKM070443
  • Model: FD750D EFI
  • 25
  • 382
  • Gasoline
  • Available
  • With mower: 62.5 in. (159 cm) | With mower (deflector raised for storage): 53.6 in. (136 cm) | Without mower: 47 in. (119.4 cm)
  • 51.2 in. (130 cm) | Mower cut: 1-5.25 in. (2.5-13.3 cm) | Cut increments: 0.25 in. (0.64 cm)

Recommendations

Advertised pricing excludes applicable taxes title and licensing, dealer set up, destination, reconditioning and are subject to change without notice. Pricing may exclude any added parts, accessories or installation unless otherwise noted. Sale prices include all applicable offers. Not all options listed available on pre-owned models. Contact dealer for details.