2025 John Deere 995 Reversible Plow 6-bottom

2025 John Deere 995 Reversible Plow 6-bottom

• Moldboard frame pivots with the bottoms

• Plastic moldboard and steel shins

• Landsides with wedges

• Front gauge wheels

Features may include:

• V-style mainframe distributes weight for good penetration

• The V-style mainframe of the 995 Moldboard Plow distributes weight for good penetration.

• The mainframe is made of high-strength 178-mm x 102-mm (7-in. x 4-in.) tubing that is 8-mm (5/16-in.) thick to handle the stress of high-horsepower tractors working in tough ground conditions.

• Moldboard frame pivots with the bottoms

• All 995 Moldboard Plows use only one set of bottoms.

• The moldboards are reversed laterally by a hydraulic cylinder that is standard equipment. There are several advantages of this design over traditional two-way roll-over plows with two sets of bottoms:

• Requires less 3-point hitch capacity

• Requires less ballasting of the tractor front end

• Eliminates initial cost and service requirements for one complete set of standards and bottoms

• Integral on-land hitch provides excellent maneuverability

• The integral hitch gives unexcelled maneuverability in turns and when parking in tight areas:

• Category 3/3N Quik-Coupler compatible

• Tractor rockshaft lever controls the raising and lowering of the plow

• Maximum plowing depth to 356 mm (14 in.)

• Provides ample clearance between the tractor tires and the plow

• Adjust front gauge wheels to limit plowing depth

• The front gauge wheels can be adjusted to limit the plowing depth to 356 mm (14 in.). They come equipped with 6.70-15 tires.

• Rear gauge wheels come in standard equipment

• Two front and one rear gauge wheels are standard equipment on the 995 Moldboard Plow:

• Equipped with 6.70-15 tires for good flotation

• Easy turnbuckle adjustment on rear gauge wheel

• Adjustable front gauge wheels limit the plowing depth to 356 mm (14 in.)